Disposal / Recycling; Instructions For Correct Use / Safety Instructions - Brill PowerAccu 24 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

4. Turn the cutting cylinder to
test the setting. None of the
5 blades of the cylinder must
touch the lower blade.

9. Disposal / recycling

These Accus
Ni-Cd
contain
nickel/cad-
mium cells.

10. Instructions for correct use / safety instructions

Checks before
A
each operation
Inspect the unit before each use.
Do not use the Accu Hand Lawn-
mower if safety devices (safety
handle; safety cover) and/or
the cutting cylinder are damaged
or worn. Never operate the unit
with the safety devices by-passed
or missing.
Inspect the area of grass you are
going to mow before beginning
work. Remove any foreign ob-
jects (e. g. stones, branches or
bones). Check the working area
for foreign objects during work.
The cutting cylinder and the
lower blade must be checked
regularly for damage and prop-
erly repaired if necessary.
Cutting tools must only be ex-
changed by Brill Service or
an authorised specialist dealer.
Proper use /
A
Responsibility
This Accu Hand Lawnmower
can cause serious injuries !
You are responsible for the
safety of the working area.
To prevent injuries, never start
the motor when the mower is
tipped. Risk of injury.
Warning ! Handle the
A
cutting tool carefully
to avoid cutting yourself.
Wear appropriate gloves to
protect your hands.
After their lifetime have expired,
they may not be disposed of
as normal house rubbish, but
must be disposed of properly.
Only use the Accu Hand Lawn-
mower for the purposes spe-
cified in these instructions.
Only work when visibility is
good.
Guide the mower at a walking
pace only.
Familiarise yourself with the sur-
roundings of your working area.
Check for possible risks which
might be not audible due to the
noise of the machine.
Wear sturdy shoes and long
trousers to protect your legs.
Keep fingers and feet away
from the cutting tool.
Make sure that there are no
other people (especially chil-
dren) or animals anywhere
near the working area.
Ensure that you have a se-
cure foothold when working.
Attention ! Take extra care
when walking backwards.
You may stumble !
If you do come into contact with
an obstacle, turn off the Accu
Hand Lawnmower by pulling the
PowerAccu out of the contact bar.
Remove the object, then check
the mower for damage and have
it repaired if necessary.
5. When you have adjusted
the cutting tool test it using
a piece of newspaper
(fig. W).
Please return PowerAccus to a
Brill dealer that sells the Power-
Accu 24-Volt System or take them
to a recycling centre that accepts
and recycles rechargeable bat-
teries.
A
Interruptions of work
Never leave the Accu Hand
Lawnmower unattended at the
working area. If you interrupt
your work store the mower
in a safe place.
If you interrupt your work to
move to another working area,
always switch off your Accu
Hand Lawnmower and pull the
PowerAccu out of the contact bar.
A
Check the environment
Never use the unit when it is
raining or in damp or wet areas.
Do not operate your Accu Hand
Lawnmower near swimming
pools or garden ponds.
Please observe the prescribed
local quiet times.
Keep the charger in a dry place.
Notes on safety regard-
A
ing the PowerAccu /
Danger of fire
Never charge the Accu after
having been heated up by oper-
ation or sun. Let cool down first.
Never expose the Accu to direct
sunlight while charging.
US
13

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

380 asm

Table des Matières