Zeiss Primo Star Mode D'emploi page 59

Primo Star / Primo Star iLED
General
Voltage supply connections
Operating temperature
Relative humidity
Operating data of plug-in power supply for binocular tube 30°/20 with integrated HD IP camera for
Primo Star
Protection class
Ingress protection mode
Electrical safety
Degree of pollution
Overvoltage category
Radio interference suppression
Line voltage
Line frequency
Power consumption output plug-in power
supply
11/2013
Appendix
via USB hub or external PSU, 5 V DC, power requirement 5 W
+5 °C to +45 °C
max. 80 %, non-condensing
II
IP20
to DIN EN 61010-1 (IEC 61010-1)
conforming to CSA and UL requirements
2
II
in compliance with EN 61326
100-240 V (±10 %), a changeover of device voltage is not
necessary due to the wide range power supply
50 / 60 Hz
5 V DC, 1.0 A
415500-7344-008
Carl Zeiss
59