Zeiss Primo Star Mode D'emploi page 57

Primo Star / Primo Star iLED
Light sources
Halogen lamp
Adjustability of light source
Color temperature at 6V
Luminous flux
Average service life
Luminous area
LED illumination
Constant, brightness-independent
color temperature of
Homogeneous field illumination
Suitable for objectives with
magnifications of
Analogous brightness adjustment from
LED modules
(reflected-light fluorescence illuminator)
Battery supply unit (accessory)
Batteries
Type
Capacity
Number per battery supply unit
Operational lifetime
Optical / mechanical data
Stand with stage focusing
With coarse focusing drive
With fine focusing drive
Total stage lift
Objective change
Objectives
Eyepieces
With field-of-view number 18
With field-of-view number 20
Specimen stage
Dimensions (width x depth)
Stage travel (X x Y)
Coaxial drive
Vernier scales
Specimen holder
Abbe condenser 0.9/1.25; Fixed-Köhler
Abbe condenser 0.9/1.25; Full-Köhler
Binocular tube 30°/20
Maximum field-of-view number
Interpupillary distance
Tube angle
Viewing height
Viewing port
11/2013
Appendix
HAL 6 V, 30 W
continuous, from 1.5 to 6 V DC
2800 K
280 lm
1000 h
1.5 x 3 mm
white light LED, peak wavelength 440 nm, LED class 2
3200 K
20 mm diameter
4x to 100x
approx. 15 to 100 %
max. 40 mW, 365 - 625 nm; LED class 3B
fuses according to IEC 127 T4.0 A/H
mono-cell (D) - commercially available, NiCd or NiMH, 1.2 V
minimum 5000 to max. 9000 mAh
5 batteries
several hours, depending on the capacity of the batteries
45 mm / rev.
0.5 mm / rev.
15 mm
manual via quadruple objective nosepiece
infinity-corrected objective range with W 0.8 mounting thread
30 mm tube size
PL 10x/18 Br. foc.
PL 10x/20 Br. foc.
mechanical stage 75x30 right / left
140 x 135 mm
75 x 30 mm
optionally right or left
readable from the right
with spring lever, left
for V 4x to 100x
obj
for V 4x to 100x
obj
20
adjustable from 48 to 75 mm
30°
380 to 415 mm
tube factor 1x
415500-7344-008
Carl Zeiss
57