Connect Binocular Tube 30°/20 With Integrated Hd Ip Camera To The Mains Supply; Ports And Their Possible Uses - Zeiss Primo Star Mode D'emploi

Primo Star / Primo Star iLED
3.5.2 Connect binocular tube 30°/20 with integrated HD IP camera to the mains supply
• Connect binocular tube 30°/20 with integrated
camera to the mains supply (not required if
device is to be operated on PC).
For this purpose insert the mini USB plug
(Fig. 19/1) into the USB 2.0 port (Fig. 19/2) on
the reverse side of the binocular tube with
integrated camera.
• Insert the USB plug into the PSU (Fig. 19/4) and
connect to a power outlet (Fig. 19/3).
Country-specific adapters are included
in the shipping contents.
If the USB 2.0 Y cable is used, leave
the second USB plug unused. The
latter will only be required if the device
is to be operated on the PC.
3.5.3

Ports and their possible uses

3.5.3.1 Saving data to the SD card via SD card port
An SD card has a max. capacity of 4 GB, an SDHC (HC = high capacity) up to 32 GB. Prior to
use on the PC, the SDHC card must be formatted in the format FAT32.
• Insert an SD / SDHC card (Fig. 20/3) into the
card slot (Fig. 20/2)
tube 30°/20.
• Briefly press the snap button (Fig. 20/1) to
trigger an exposure.
The images are saved on the
SD / SDHC card in JPG format.
• Press the snap button (Fig. 20/1) for longer to
start a video recording.
Briefly pressing the snap button once again
stops the video recording.
11/2013
Start-Up and Operation
of the binocular
415500-7344-008
Fig. 19 Connecting to the mains supply
Fig. 20 Inserting SD / SDHC card
Carl Zeiss
31