Debris Hopper Maintenance - Advance SC8000 Mode D'emploi

DEBRIS HOPPER MAINTENANCE

CAUTION!
Turn the key switch off (O) and remove the key, before opening any access panels.
1 See Figure 10. Push down on the Right Side Skirt Latch (32) and swing the Skirt Assy (A) open as shown.
2 Disconnect the small vacuum hose from the Screen (B) and slide the entire Hopper (C) out of the machine.
3 Remove the Screen (B) from the Hopper (C) and thoroughly rinse both to clear debris.
FIGURE 10
3/13
INSTRUCTIONS FOR USE
56091075 - SC8000
ENGLISH - A
A - 25