Step 3: Switching On All Devices - Unitron uTV 2 Manuel D'utilisation

Step 3: Switching on all devices

To use the uTV 2, all devices must be
switched on.
Switch on your TV or other audio source.
Make sure your hearing aids are switched
on and properly in place.
To turn ON your uDirect 2, slide the power
switch to the ON position as shown in fig. 1.
uDirect 2
ON
Fig. 1
10
audio po po po power o o o w w wer we we we
Switch on the uTV 2 by a short press of the
ON/OFF button (a) as shown in fig. 2. The status
light (g) will illuminate green initially and may
later switch to blue.
uTV 2
(a)
Fig. 2
If the uDirect 2 power indicator blinks red or is
not illuminated at all, the uDirect 2 battery level
may be low. In this case, charge the uDirect 2
first, as described in step 10.
For a more detailed explanation of the uDirect 2
indicator lights, refer to the uDirect 2 user guide.
(g)
11