Güde GH 2802 SILENT Traduction Du Mode D'emploi D'origine page 23

Risk of electric shock.
Symptom Possible cause
Machine Collection box not
not running fitted properly
Feeding hopper not
fitted properly
Defective outlet
Extension cable is
damaged
Fuse has been
activated
Overload protection
has been activated
Shredded Shredded material
material is wet and soft
not pulled
in
Shredded material
has got jammed in
the machine
Service
Any technical questions? Complaint? Do you need
spare parts or operation manual?
Go to our website www.guede.com and the section
Service will help you quickly and without bureaucracy.
Please, help us to help you. In order to identify your device
in case of complaint, please indicate serial number, order
number and year of manufacture. All information is
available on the product label. To have all information
always at hand, put them down.
Serial number:
Order number:
Year of manufacture:
Phone: +49 (0) 79 04 / 700-360
Fax: +49 (0) 79 04 / 700-51999
E-Mail: support@ts.guede.com
Important information for the customer
Please be sure to know that returning the product in or
after the warranty period must be made in the original
packaging.
Remedy
Install the collection box
properly
Install the feeding
hopper properly
Use another outlet
Check or replace the
cable
Change the fuse
Press the overload
protection button (pic.
A/8) and remove the
blocking as specified in
"Operation"
To insert the shredded
material in the machine,
use the sliding part
Remove the blocked
shredded material
(safety gloves to be
worn at all times)
18