Publicité
Les langues disponibles
Les langues disponibles
Introduction
To enjoy your new electric garden shredder as long as
possible, please read carefully the Operating Instructions
and the attached safety instructions before using it.
Further, we recommend keeping the Operating
Instructions to recall the product features in the future.
Within the continuous product development, we
reserve the right to make technical changes to
improve it.
This document represents translation of the original
Operating Instructions.
Supply includes
Take the machine out of the transport package and check
whether there are the following parts:
GH 2802 SILENT Garden Shredder
2 pcs of transport wheels with wheel covers
Axis
Feeding help
Collection box
4 screws with washers
Allen key
Spanner
Original Operating Instructions
Please contact your dealer if any parts are missing or are
damaged. When assembled, the machine weighs 14 kg.
Take the machine out of the transport package in two
people if necessary.
Machine specification
Robust garden shredder with a knife cutting mechanism.
Ideal for trees and bushes. Shredded material is
effortlessly ground by the steel rotary knife, accelerating
the composting process. Automatic pulling-in of shredded
material within Ø 40 mm.
Pic. A
1.
Feeding help
2.
Garden shredder
3.
Transport wheel
4.
Feet
5.
Collection box
6.
Overload protection-RESET
7.
ON/OFF switch
8.
Entry and exit of the shredded material
Technical specifications
GH 2802 SILENT #94376 ELECTRIC GARDEN
SHREDDER
Voltage/frequency:
Engine output:
Max. engine speed:
Protection type/class:
Max. branch diameter:
Collection box capacity:
Noise:
Weight:
*
Noise information
Measured values learnt according to 2000/14/EG
General safety instructions
Read carefully these Operating Instructions.
Familiarise with the controls and proper use of
230V~50Hz
2,800W (P1;S6 40%)**
-1
60 per min
II
max. 45mm
60l
L
106 dB*
WA
19,4 kg
the machine. Keep the Operating Instructions
for future reference.
The machine meets the EN 61000-3-11
requirements and is subject to special
conditions for connection. That means that
using the machine on any points of
connection is not allowed.
The machine may lead to temporary
voltage spikes under inappropriate system
conditions.
The machine has exclusively been
designed to be used on points of
connection not exceeding the maximum
allowable system impedance Zmax =
0.233
As the user, you must make sure, after an
agreement with your energy supplier if
necessary, that your point of connection
where you want the machine to be
operated meets the requirement specified
above.
Safe work
Keep the place of your work clean!
Any mess in the place of your work may result
in injuries.
Consider the environment influences
Do not expose the machine to rain.
Do not use the machine in a moist or wet
environment.
Provide adequate lighting.
Do not use the machine near flammable liquids
or gases.
Keep other persons in a safe distance!
Do not let other persons, especially children,
touch the machine and the cable. Keep them
in a sufficient distance from the place of your
work.
Store the machine properly!
A machine that is not being used must be kept
in a dry and locked place, inaccessible to
children.
Do not overload the machine!
Work within the specified power range.
Use the right machine!
Do not use the machine for purposes for which
it has not been designed.
Take care of your machine!
Comply with the servicing regulations and
instructions.
At regular intervals, check the machine cable
and have it replaced by an authorised
professional if damaged.
13
Publicité
