Removal Of Gas Appliance - Maytag MGR5870BDB Guide De L'utilisateur

NOTE: To prevent staining or discolora-
tion, wipe up fat, grease or acid (tomato,
lemon, vinegar, milk, fruit juice, mari-
nade) immediately with a dry paper towel
or cloth.
STAINLESS STEEL
(Select models)
DO NOT USE ANY CLEANING
PRODUCT CONTAINING CHLO-
RINE BLEACH.
ALWAYS WIPE WITH THE GRAIN
WHEN CLEANING.
Daily Cleaning/Light Soil –– Wipe
with one of the following - soapy water,
white vinegar/water solution, Formula
409 Glass and Surface Cleaner* or a
similar glass cleaner - using a sponge
or soft cloth. Rinse and dry. To polish
and help prevent fingerprints, follow
with Stainless Steel Magic Spray (Part
no. 20000008)**.
Moderate/Heavy Soil –– Wipe with
one of the following - Bon Ami, Smart
Cleanser, or Soft Scrub* - using a
damp sponge or soft cloth. Rinse and
dry. Stubborn soils may be removed
with a damp Scotch-Brite* pad; rub
evenly with the grain. Rinse and dry.
To restore luster and remove streaks,
follow with Stainless Steel Magic
Spray**.
Discoloration –– Using a damp
sponge or soft cloth, wipe with Cameo
Stainless Steel Cleaner*. Rinse imme-
diately and dry. To remove streaks and
restore luster, follow with Stainless
Steel Magic Spray**.
MAINTENANCE
OVEN DOOR
CAUTION:
Do not place excessive weight on
or stand on an open oven door.
This could cause the range to tip
over, break the door, or injure the
user.
Do not attempt to open or close
door or operate oven until door is
properly replaced.
Never place fingers between hinge
and front oven frame. Hinge arms
are spring mounted. If accidentally
hit, the hinge will slam shut against
oven frame and could injure your
fingers.
TO REMOVE:
1. When cool, open the oven door to the
first stop position (opened about four
inches).
2. Grasp door at each side. Do not use
the door handle to lift door.
3. Lift up evenly
until door clears
hinge arms.
TO REPLACE:
1. Grasp door at
each side.
2. Align slots in the door with the hinge
arms on the range.
3. Slide the door down onto the hinge
arms until the door is completely seat-
ed on the hinges. Push down on the
top corners of the door to completely
seat door on hinges. Door should not
appear crooked.
NOTE: The oven door on a new range
may feel "spongy" when it is closed. This
is normal and will decrease with use.
OVEN WINDOW
TO PROTECT THE OVEN DOOR
WINDOW:
1. Do not use abrasive cleaning agents
such as steel wool scouring pads or
powdered cleansers as they may
scratch the glass.
2. Do not hit the glass with pots, pans,
furniture, toys, or other objects.
3. Do not close the oven door until the
oven racks are in place.
Scratching, hitting, jarring or stressing the
glass may weaken its structure causing
an increased risk of breakage at a later
date.
LEVELING LEGS
CAUTION:
Be sure the anti-tip bracket secures
one of the rear leveling legs to the
floor to prevent the range from ac-
cidentally tipping.
The range should be leveled
when installed. If the range
is not level, turn the plastic
leveling legs, located at each
corner of the range, until
range is level.
ANTI-TIP BRACKET
LEVELING LEG
LEVELING LEG
REMOVAL OF GAS
APPLIANCE
Gas appliance connectors used to con-
nect this appliance to the gas supply are
not designed for continuous movement.
Once installed, DO NOT repeatedly move
this gas appliance for cleaning or to relo-
cate. If this appliance has to be moved
and/or removed for servicing, follow the
procedure described in the installation in-
structions. For information, contact
Maytag Customer Service at 1-800-688-
9900.
To prevent range from accidentally tip-
ping, range must be secured to the floor
by sliding rear leveling leg into the anti-tip
bracket.
ANTI-TIP BRACKET
16