Gas Operation; Operation Rm 8Xx1Models; Explanation Of Operating Controls; Electrical Operation - Dometic RM 8501 Mode D'emploi

Refrigerator operation
4.6 Operation RM 8xx1 models

4.6.1 Explanation of operating controls

Manual energy selection / automatic igniti-
on (RM 8xx1) MES :
1 2 3
4
1
= Power ON/OFF switch
2
= Energy selector button
3
= Energy selector button
4 = Energy selector button
= Temperature level selection
6
= Temperature level display
7
= Indicator LED failure /
8
Reset button GAS FAILURE
Switching ON/OFF
Switch ON by pressing button (1), 2s
Switch OFF by pressing button (1), > 2s
120V AC operation
Select "Mains voltage" by pressing button (2)
Set temperature step by pressing button (6)
12V DC operation (vehicle's battery)
Select "Battery voltage" by pressing button
(4)
Set temperature step by pressing button (6)

Gas operation

Select "Gas" by pressing button (3)
Set temperature step by pressing button (6)
6
7 8
Fig. 6
120V ~
GAS
12V =
16

4.6.2 Electrical operation

1
2
To start the refrigerator, press button (1) for 2
seconds.
The refrigerator starts with the last selected
type of energy.
120V operation :
Press button (2) :
12V operation :
Press button (4) :
4.6.3 Gas operation
Gas operation :
Press button (3) :
The ignition process is activated automatical-
ly by means of an automatic igniter.
i
The flame extinguishes after reaching the pre-
set cooling compartment temperature and
ignites again if the cooling compartment tem-
perature increases again. If the flame is not lit
after the first ignition attempt, the automatic
igniter repeats the ignition twice (duration 30 s)
at time intervals of 2 minutes. If the flame is
not lit afterwards, a fault is indicated.
3 4
Fig. 7
3
Fig. 8