Attachment Possibilities Middle - Kärcher MIC D Mode D'emploi

6.4.1.3 Tilt function with attached appliances
In order to adjust the inclination of the attached appliances,
proceed as follows:
Pull the tilt function bolt, the attachment can swing on

the side in a lowered condition.
When completely lifted, the attachment is aligned hori-

zontally.
6.4.2 4-point retainer (optional)
6.4.2.1 Mounting the attachment
In order to attach the 4-point retainer to the front lift, turn

the lower retainer around and fixate it by means of 2
bolts.
To mount the attachment to the 4-point retainer, drive

the vehicle up to the attachment and lower the front
power lift until the upper coupling points are located un-
derneath the ones of the attachment.
Pull the lever of the central 4-point locking mechanism

up and push it to the right in order to open the locking
mechanism.
Drive up to the attachment until the retainers have con-

tact.
6.4.3 Retaining frame front
6.5

Attachment possibilities middle

6.5.1 Lifting platform (option)
The lifting platform is controlled via the control lever on the
right of the joystick. To activate it, it must be changed over
using the switch double acting control hydraulics AUX rear
left/lifting platform.
6.4.1.4 Dismounting the attachment
Lower the attachment.

Loosen the upper link first.

Pull the bolt out of the lower link, in order to do so, re-

move the safety cotters first.
Drive away from the attachment.

WARNING
Do not install, raise or move attachments when persons
are in the vicinity of the machine.
1 4-point retainer
2 Central locking lever
3 Lower retainer
4 Upper retainer
Carefully move the front power lift up until the attach-

ment is fixated in the retainers and raised.
Push the lever of the central 4-point locking mechanism

back to the left, the lever must snap into the holder in
order to lock the attachment.
6.4.2.2 Dismounting the attachment
Unlock the 4-point locking mechanism when the attach-

ment is raised.
Lower the 4-point retainer with the front power lift until

the retainers are free.
Drive away from the attachment.

Close the central 4-point locking mechanism before the

1 Retaining frame front
In the retainer frames, various attachments or counterbal-
ance weights can directly be attached to the vehicle.
30
-
EN 87