14
4.3
DOOR REMOVAL AND INSTALLATION
EN
To open the door, the safety screen must be
removed to allow the door to be opened or
closed. Release the top and bottom door
latches, located at the right side of the door.
Reverse these steps to close the door. Ensure the
safety screen is installed correctly before using
appliance.
NOTE: The protective wrap on plated parts is
best removed when the assembly is at room
temperature but this can be improved if the
assembly is warmed, using a hair dryer or
similar heat source.
4.4
GRATE INSTALLATION
A.
Remove the 3 screws from the location shown
in the base of the fi rebox.
B.
Secure the grate to the fi rebox base using the
3 screws removed.
W415-1365 / A / 07.28.16
DOOR LATCH