Accessories; Consumable Components - John Bean T 7700 Manuel D'utilisation

1
1
4
9
38
2
4
5
2
3
7
6
5
Specifi cations
3.1

Accessories

A series of accessories are normally
available for the machine.
All accessories are indicated on the website:
http://service.snapon-equipment.net/
After accessing the website, proceed as
follows:
- Select Accessory Plan (1).
Access the specifi c page for Accessories.
- Select the reference Brand in the fi eld
Brands (2).
- Select the Type of product "Tyre changers" in
the fi eld Product lines (3).
3
- Open the fi eld Model (4) and select the specifi c
machine model among the ones in the list.
- Enter "SEARCH" (5) to display the list of
available accessories.
3.2

Consumable components

The machine use leads to the wear of parts, sometimes
intentionally designed to protect the machine parts or
the rims.
The components listed below are classified as
Consumable components and must be replaced by
the fi nal user.
List of Consumable components:
1 Rim protection for Tool
2 Protection, Sliding block
3 Bead Breaker Disc
4 Disc support Protection
5 Cone D. 64
6 Cone D. 78
7 Cone D. 120
8 Cone D. 145
9 Bead breaking plate protection (if any)
Use the Part Number (P/N) shown in the fi gure to order
replacement parts.
These and other components are listed in the Spare
Parts and Accessories Plan manuals supplied with
8
the machine.
Similarly to the consumable components, the plastic
guards on the machine are not covered by the warranty
in case of failures due to accidental impacts or due to
negligence in using and moving the machine.
....... .......
-