Cleaning & Maintenance - Peg-Perego tender csr Notice D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

LOADING AND UNLOADING SEQUENCE
20• Use the brake and place the fi rst child in the
front seat (1).
21• Place the second child in the back seat (2),
closest to the handlebar. Do the opposite to
remove the children, that is remove the child
from the back seat (closest to the handlebar)
fi rst; remove the child in the front seat (furthest
from the handlebar) last.
ADJUSTING THE BACKREST
22• The backrests of the stroller are independent
and can be reclined in several positions. To
lower or raise the backrest, lift the handle up
as you adjust the backrest, blocking it in the
desired position.
FRONT BAR WITH TRAY
23• Fixed large tray with drink-holder for the child
and toy carrier.
ADJUSTING THE FOOTBOARDS
The stroller has front and rear footboards, both
of which can be adjusted in two positions.
24• To adjust the front footboard in the upper
position, pull the horizontal rod under the
footboard toward the inside. To lower the
footboard, pull the horizontal bar under the
footboard toward you.
25• To adjust the rear footboard in the upper
position, push the horizontal rod under the
footboard upward. To lower the footboard, pull
the horizontal rod under the footboard down.
ADJUSTABLE HANDLEBAR
26• The handlebar of the stroller is height-
adjustable. To adjust the height of the
handlebar, simultaneously press the side
buttons as shown in the fi gure and block the
handlebar in the desired position.
CLOSING
27• Use the brake and raise the compass devices of
the hoods.
28• Make the front wheels swivel, leaving them
turned toward the front.
29• If they have been used, lower the Ganciomatic
System's attachments by fi rst raising the
fabric from the seat as indicated in the fi gure,
then pressing the tongues on the inside, as
indicated by the arrow. See also Point 38.
30• Pull up the two levers on the handlebar to
release the catch.
31• Release the brake and use your left foot to
press the safety lever.
32• Push the handlebar down, press until the last
click when the stroller closes automatically.
33• Make sure the stroller is closed correctly, by
the safety hook, as indicated in the fi gure. The
stroller is free standing when closed.
REMOVABLE LINING
34• To remove the stroller lining, unfasten the
fabric from the armrests and remove it from
the sides.
35• To remove the lining from the seat units,
unfasten the buttons on the sacks at the sides
of the backrest, the seats, and under the seats.
36• Slip the leg dividers out from under the seats.
Remove the two sacks from the top.
ganciomatic system
The Ganciomatic System is the practical and
quick system that allows you to fasten the
Primo Viaggio car seat, also equipped with
the Ganciomatic System and sold separately,
to the stroller's second position closest to
the handlebar, thanks to the Ganciomatic
attachments. Primo Viaggio can be removed
from its base (which remains in the car) and
fastened to the chassis to carry the child
without disturbing him or her.
GANCIOMATIC STROLLER ATTACHMENTS
37• To raise the Ganciomatic System stroller
attachments, lift the fabric from the seat and
pull the two attachments upwards until you
hear a click, as indicated in the fi gure.
38• To lower the Ganciomatic System stroller
attachments, fi rst lift the fabric from the seat as
indicated in the fi gure and then pull the button
as indicated by the arrow.
TENDER CSR + PRIMO VIAGGIO CAR SEAT
39• To fasten the car seat to the stroller, you must:
- activate the stroller's brakes;
- remove the hood from the second seat, the
one closest to the stroller's handlebar;
- raise the fi rst seat's backrest, the one furthest
from the handlebar;
- completely lower the second seat's backrest;
- raise the stroller's Ganciomatic attachments;
- place the car seat facing the mother and push
it down until it clicks;
- fasten the car seat by lining it up with the
chassis groove, as indicated in the fi gure.
• See the instruction manual for removing the
car seat from the stroller.
accessory line
40• Cover All Rain Canopy: Cover-all rain canopy
made of transparent PVC, for the Tender CSR
twin stroller.
Can also be used with the car seat attached.
41• Diaper-Changing Bag: Satchel with pad for
changing baby's diaper. Attaches to the stroller.
cleaning & maintenance
Your product requires only minimal
maintenance. Cleaning and maintenance
operations must be performed only by adults.
• Be sure to keep all moving parts clean,
lubricating them with light oil if necessary.

Publicité

Table des Matières
loading

Table des Matières