Cleaning And Maintenance - Peg-Perego Baby carriage Notice D'emploi

MICO, ATON, ATON 2 (A).
PRATICO: Transform your Book Plus S to a
lighter strollerwith our compact Pratico seat
that comes with its very owntravel bag (B).
BORSA. Diaper-Changing Bag with pad for
changing the baby (C).
CUP HOLDER: may be attached to the
mushroom button on the frame of the stroller
(D).

CLEANING AND MAINTENANCE

PRODUCT MAINTENANCE: protect from the
weather: water, rain, or snow; prolonged and
continuous exposure to bright sunlight may
give rise to colour changes of various different
materials; store this product in a dry place.
CLEANING THE CHASSIS: periodically clean all
plastic parts with a damp cloth. Do not use
solvent or similar cleaning products; keep
all metal parts dry to prevent rusting; keep
moving parts clean (adjustment mechanisms,
locking mechanisms, wheels, ...) and free of
dust and sand and, if necessary, lubricate with
light machine oil.
______________________________________________
SEAT POP-UP
INSTRUCTIONS
1 5 FRONT BAR: To attach the front bar, slide the
attachments into the armrests and push towards
the seat until they lock into place (fig_a). To remove
the front bar, press the two buttons (fig_b) and pull
out (fig_c). Open the front bar on one side only, to
facilitate the child's entry and exit.
1 6 BACKREST: to adjust the backrest, lift the handle
(fig_a) and recline it to the desired position (fig_b).
The backrest can be adjusted into different
positions.
1 7 FOOTREST: before adjusting the foot rest,
ensure its cover is accurately fitted; if it isn't,
fit it accordingly. To lower the footrest push
the two levers downwards and then push
the footrest downwards (fig_a); to raise the
footrest lift it upwards (fig_b).
1 8 FIVE POINT SAFETY HARNESS: To fasten it,
push the two waist strap buckles (with the
shoulder straps attached – arrow_a) into
the leg divider until they click into place
(arrow_b). To unfasten it, press the round
button in the centre of the buckle (arrow_c)
and pull the waist straps out (arrow_d).
1 9 To tighten the waist strap, pull on both sides
in the direction of the arrow (arrow_a). To
loosen it, move it in the opposite direction.
2 0 To adjust the height of the safety harnesses,
release the two buckles on the rear of the
backrest.
All manuals and user guides at all-guides.com
Pull the shoulder straps towards you
2 1 HOOD: To fasten, slide the attachments into
2 2 When the backrest is fully reclined, open
2 3 FASTENING THE SEAT TO THE CARRIAGE: Seat
2 4 RELEASING THE SEAT FROM THE CARRIAGE:
2 5CLOSING THE STROLLER: To close the stroller
2 6 REMOVING THE COVER: unbutton the cover along
- 20 -
(arrow_a) until the buckles are released and
insert them in the backrest loops (arrow_b).
Remove the shoulder straps from the sack
(arrow_c) and insert them in the most
appropriate loop (arrow_d), then re-attach
the two buckles on the rear of the backrest
(arrow_e) The buckles are securely attached
when a click is heard (fig_f).
the sides of the seat (fig_a) and button the
hood to the back of the backrest (fig_b). To
remove the hood: pull out the attachments
and unbutton. To lift the hood: pull it towards
you; to close the hood: push it back. The hood
includes a slot from which you can hang the
child's favorite toy (fig_c).
the hood using the double slider on the
back (fig_a). To provide your child greater
ventilation, lift the hood section fastened
with Velcro (fig_b).
Pop-Up can be secured to the carriage either
facing mom or the street. Place it centrally
on the carriage alongside the symbols (fig_a)
and press downwards with both hands until
it clicks into place (fig_b). To ensure it is
properly secured, grab the seat from the front
bar and pull upwards.
Press the two buttons on the armrests of
the seat (fig_a) and then the two levers
underneath (fig_b); pull up the seat (fig_c)
until it releases. If the backrest is fully reclined
forward (in the closed position, facing the
world), the seat cannot be released from the
chassis (fig_d). In this case, lift the backrest to
the position of use before releasing the seat
from the chassis (fig_e). If the backrest is fully
reclined forward (in the closed position, facing the
world), the seat cannot be released from the chassis
(fig_d). In this case, lift the backrest to the position
of use before releasing the seat from the chassis
(fig_e).
with the seat facing the street, press the
backrest adjustment handle (fig_a) and lower
the backrest fully forward (fig_b). To open it,
lift the backrest to the position of use, until
it locks into place (fig_c). To close the stroller
with the seat facing mom, fully recline the
backrest (fig_d).
the armrests (fig_a) and the backrest (fig_b),
remove the cover from the footrest (fig_c), unfasten
the side elastics (fig_d), unscrew (fig_e) and remove
the harness on both sides, and finally remove the
crotch strap from above, pushing from under the
seat (fig_f).