WARNING: Lift the base up to ensure it is correctly
fastened.
GANCIOMATIC SYSTEM
17 Ganciomatic is a fast and practical system that allows
you to attach the pram body, the car seat and the seat
to the Ganciomatic base of the chassis in one quick
step.
SERIAL NUMBERS
18 Information about the production date can be found
on the Gt4 .
_ The product name, production date and serial number
of the chassis.
This information is required for any complaints.
INSTRUCTIONS
GT4 SEAT
PRODUCT CHARACTERISTICS
_ The item is numbered progressively.
_ The Seat is a reversible seat: it can turn to face mum
or to face outwards.
The images referring to the textile details may
differ from the collection purchased.
1 FRONT BAR: To attach the front bar, slide the
attachments into the armrests and push towards
the seat until they lock into place (fig_a). To remove
the front bar, press the two buttons (fig_b) and pull
out (fig_c). Open the front bar on one side only, to
facilitate the child's entry and exit.
2 BACKREST: To adjust the backrest, press the handle
bar (fig_a) and lower it to the desired position (fig_b).
The adjustable backrest can be locked into a number
of positions.
3 FOOTREST: before adjusting the foot rest, ensure its
cover is accurately fitted; if it isn't, fit it accordingly. To
lower the footrest push the two levers downwards and
then push the footrest downwards (fig_a); to raise the
footrest lift it upwards (fig_b).
4 FIVE POINT SAFETY HARNESS: To fasten it, push the
two waist strap buckles (with the shoulder straps
attached – arrow_a) into the leg divider until they click
into place (arrow_b). To unfasten it, press the round
button in the centre of the buckle (arrow_c) and pull
the waist straps out (arrow_d).
5 To tighten the waist strap, pull on both sides in the
direction of the arrow (arrow_a). To loosen it, move it
in the opposite direction.
6 To adjust the height of the safety harnesses, release
the two buckles on the rear of the backrest.
Pull the shoulder straps towards you (arrow_a) until
the buckles are released and insert them in the
backrest loops (arrow_b). Remove the shoulder straps
from the sack (arrow_c) and insert them in the most
appropriate loop (arrow_d), then re-attach the two
buckles on the rear of the backrest (arrow_e) The
buckles are securely attached when a click is heard
(fig_f).
7 HOOD: slide the hood's attachments into the seat's
attachments (fig_a), button the top part of the hood
on both sides of the seat (fig_b), and finally fasten the
sides with the elastics (fig_c). To remove the hood:
pull out the attachments and unbutton.
8 The hood has a double zip and can be extended
(fig_a) Open and pull the hood to extend it (fig_b).
9 It has an insert in the front part for more shade (fig_c)
and a slot from which you can hang your child's
favourite toy (fig_d).
10 FOOT MUFF: Lift the leg rest, slide on the foot muff
and button it below (fig_a); then, slide the foot muff
under the front bar (fig_b).
Fasten the foot muff on the sides of the footrest
(fig_c) and inside the seat (fig_d).
11 FASTENING THE SEAT TO THE CARRIAGE: Book Seat
can be secured to the carriage either facing mom or
the street. Place it centrally on the carriage alongside
the symbols (fig_a) and press downwards with both
hands until it clicks into place (fig_b). To ensure it is
properly secured, grab the seat from the front bar and
pull upwards.
12 RELEASING THE SEAT FROM THE CARRIAGE: Press
the two buttons on the armrests of the seat (fig_a)
and then the two levers underneath (fig_b); pull up
the seat (fig_c) until it releases. If the backrest is fully
reclined forward (in the closed position, facing the
world), the seat cannot be released from the chassis
(fig_d). In this case, lift the backrest to the position of
use before releasing the seat from the chassis (fig_e).
13 CLOSING THE BASKET + SEAT:
To close the stroller with the child seat fastened in
the rear-facing position, recline the seat's backrest
completely (fig_ a) and close the chassis.
To close the stroller with the child seat fastened in
the forward-facing position, press the seat's backrest
adjustment handle, fold the backrest fully forward
(fig_b), and close the chassis.
To open the chassis, return the seat (in both versions)
to the position of use, with the backrest vertical.
14 REMOVING THE COVER: unbutton the cover along
the armrests (fig_a) and the backrest (fig_b), remove
the cover from the footrest (fig_c), unfasten the
side elastics (fig_d), unscrew (fig_e) and remove the
harness on both sides, and finally remove the crotch
strap from above, pushing from under the seat (fig_f).
SERIAL NUMBERS
15 Gt4 Seat reports information as at the date of
manufacture of the product.
_ Product name, date of manufacture and serial
number of the seat.
This information is required for any complaints.
THE ORIGINAL ACCESSORY PEGPEREGO
PegPerego accessories are designed as a useful,
practical means of simplifying the lives of parents.
Discover all your product's accessories on
www.pegperego.com
CLEANING AND MAINTENANCE
Cleaning must only be carried out by adults.
PRODUCT MAINTENANCE: protect from the weather:
water, rain, or snow; prolonged and continuous
exposure to bright sunlight may give rise to colour
changes of various different materials; store this
product in a dry place.
CLEANING THE CHASSIS: periodically clean all plastic
parts with a damp cloth. Do not use solvent or
similar cleaning products; keep all metal parts dry to
prevent rusting; keep moving parts clean (adjustment
mechanisms, locking mechanisms, wheels, ...) and free
of dust and sand and, if necessary, lubricate with light
machine oil.
PEGPEREGO S.p.A.
PegPerego SpA adopts a quality management system
certified by TÜV Italia Srl in accordance with the ISO
9001 standard. PegPerego can make changes at any
time to the models described in this publication for
technical or commercial reasons.
PEGPEREGO AFTER-SALES SERVICE
If any parts of the item get lost or damaged, only
use genuine PegPerego spare parts. For any repairs,
replacements, information on the products and sales
- 19 -