Safety Guide - Steinberg 3135 Mode D'emploi

USER'S GUIDE
POST SCALES
EN
INTRODUCTION
Before you use the scale, please read this manual carefully, and keep it stored properly for future use.

SAFETY GUIDE

For good performance and precise measurement, be careful during daily operation and maintenance. Regard
the following instructions:
• Do NOT overload the scale. This will damage the load cell and void the warranty.
• Do NOT leave load on the scale for long. This will decrease the scale's accuracy and shorten the load
cell's life.
• When the scale runs out of power, replace the batteries.
• Do NOT use the scale in thunder or rain.
• Do NOT attempt to repair the scale yourself. Contact your local representative.
• Avoid extreme temperatures. Do not place the unit in direct sunlight or near the air conditioning.
• Make sure the scale is placed on a stable table and is not subject to vibrations.
• Do not use the scale close to large electrical appliances such as welding machines or large motors. Do
not leave batteries in the device if you do not use it for a long time.
• Avoid vibrations. Do not place your scale near vibrating heavy machinery.
• Avoid places where moisture can lead to condensation. Avoid direct contact with water.
• Do not place the unit close to windows, doors or fans that may cause unstable results due to air
currents.
• Keep your machine clean. Do not store products on the scale when it is not used.
SPECIFICATIONS
Model 3135 SBS-PT-40/1
Max weight / Accuracy 40 kg / 1 g
Min. weight
Display
Units
Power 2 x AAA batteries or AC/DC adapter 6V 500 mA
Functions
Max operation time with batteries
DISPLAY
5
4
3
2 1
1. main display
2. STABLE – when the load is stable, STABLE message is displayed
3. negative load indication
4. low battery level indicator – replace the batteries when this indicator is on
5. units – during normal operation the display will show one unit
3136 SBS-PT-50/2
50 kg / 2 g
3 g 12 g
LCD
kg-g / lb-oz / lb / kg
Zero, tare, hold, calibration
15 hours
9
Rev. 31.03.2017
EN