Hendi 233740 Mode D'emploi page 6

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 31
Operation
1). Preparation
• Open the glass sliding door using the door han-
dle.
• Put the food in the suitable container before plac-
ing it inside the appliance. Place it on the shelves
and close the glass sliding door.
• Ensure there is enough spacing between the food
for the heat to be evenly distributed.
• Add some water into the water bowl and put in-
side the cabinet.
• Connect the appliance inlet of the detachable
power cord to the appliance first, then connect
power plug to a suitable electrical power outlet.
Note:
• Do not overload the shelves to avoid any damage.
Max. loading is about 8 kg.
• Do not use the shelves for storage and process-
ing of acidic, alkaline or salty food.
• There is a cover lid for protection of power cord
inlet. There are 2 screws included for fixing the
cover lid.
EN
Cleaning and Maintenance
Attention: Always unplug the appliance and open
the glass sliding door to allow it cool down com-
pletely before cleaning.
• Clean the appliance regularly and any food resi-
dues removed.
• CAUTION! Never use any abrasive or hard objects
for leaning.
Parts
All accessories such as wa-
ter bowl, shelves,
External glass surfaces
Interior glass surfaces
Glass door
Storage
• Always make sure the appliance has already
been disconnected from the electrical power out-
6
How to clean
• Soak in warm, soapy water for about 10 to 20 minutes.
• Rinse under running water thoroughly
• Wipe clean with a soft cloth and a little mild detergent.
Make sure no water or moisture enters inside the of
the appliance
• Remove any food deposits.
• Wipe clean with a soft cloth and a little mild detergent.
Make sure no water or moisture enters inside the of
the appliance.
2). Start heating
• Switch ON the appliance by pressing the power
switch & the heating indicator lights ON.
• Adjust the temperature setting knob (Range
30°C to 90°C) to the desired temperature.
• When the desired temperature is reached, the
heating indicator light goes out.
• Inside cabinet temperature can be checked with
the temperature display at the lower front side.
• The food is kept warm with the desired tempera-
ture that previously set.
• You can also switch ON the inner light by pressing
the light switch.
• Caution! Risk of burns! Always open the door us-
ing the door handle.
• Some of the parts may become very hot. Wear
gloves (not supplied) to remove the food. And do
not touch the metal shelves.
• When not in use, set the temperature setting
knob to 0°C, switch OFF the power switch and
the heating indicator goes out.
• Unplug the appliance from the electrical power outlet.
• Allow the appliance to cool down completely be-
fore cleaning or storage.
• The exterior and interior glass surfaces can be
cleaned with a damp cloth and a little detergent.
• Shelves can be removed and washed in water.
• Do not use water jet or steam cleaner for clean-
ing and do not push under the water.
• No any parts can be cleaned in the dishwasher.
let and cool down completely.
• Store the appliance in a cool, clean place.
Remark
Dry all parts well at last.

Publicité

Table des Matières
loading

Table des Matières