Hendi 233740 Mode D'emploi page 5

Grounding installation
This appliance is classified as protection class I
appliance and must be connected to a protective
ground. Grounding reduces the risk of electric
shock by providing an escape wire for the electric
Different operation parts
Shelf
Glass door
Control panel
Power
switch
Preparation before using for the first time
• Remove all protective packaging and wrapping.
• Check for the completeness of the product (water
bowl x1, screws x2, detachable power cord). In
case of incomplete delivery and damages. Please
contact supplier (See == > Warranty)
• Place all the shelves inside the appliance.
• Switch ON the appliance by pressing the power
switch and adjust the temperature to 90°C. The
heating indicator will light up.
• When the temperature reaches the set tempera-
ture, the heating indicator will go out.
Light Temperature
switch setting knob
current. This appliance is equipped with a cord
having a grounding wire with a grounding plug. The
plug must be plugged into an outlet that is properly
installed and grounded.
Heating Temperature display
indicator
Note: Due to manufacturing residues, the appli-
ance may emit a slight odor. This is normal and
does not indicate any defect or hazard. Make sure
the appliance is well ventilated.
• Unplug the appliance and allow appliance to cool
down completely and clean it afterwards.
(See == > Cleaning and Maintenance).
Temperature display
Water Bowl
EN
5