Safety Information; Safety Rules - VM Motori D700 Série Manuel D'instructions

SAFETY RULES

– During the design and construction phas-
es, the Manufacturer paid special attention
to the aspects which are liable to cause any
risk for the safety and health of people inter-
acting with the engine. Besides complying
with the relevant legislation in force, he fol-
lowed all the "rules for a good construction
technique". The purpose of this information
is making users aware of the need to pay
the utmost attention to prevent any risk.
Caution is however imperative. Safety also
depends on all the operators who interact
with the engine.
– Read carefully the instructions contained
in the manual supplied and those applied on
the engine, in particular follow those con-
cerning safety. Spend some of your time
reading the instructions to avoid unpleasant
accidents.
– Pay attention to the meaning of the sym-
bols in the applied plates; their shape and
colour have a specific meaning related to
safety. Keep them visible and follow the
stated information.
– Use the engine only for the tasks author-
ised by the manufacturer and do not tamper
with any device to achieve a different per-
formance from the intended one.
– The staff carrying out any type of inter-
vention throughout the life of the engine
should have precise technical skills, specific
abilities and experiences acquired and ac-
knowledged in this sector. The lack of these
requirements may cause damages to peo-
ple's safety and health.
English

SAFETY INFORMATION

– All the installation phases should have
been taken into account since the develop-
ment of the initial project. The designer has
to observe with the engine fixing points and
the general indications provided by the
manufacturer.
– Carry out the handling of the engine in
compliance with the information stated di-
rectly on the engine, on the packaging and
in the operating instructions supplied by the
manufacturer.
– When lifting or transporting unpacked en-
gines use means of appropriate load capac-
ity which must be properly anchored.
– When lifting and transporting packaged
engines, means of appropriate load capaci-
ty as stated on the packaging itself.
– Before carrying out other transfers, cre-
ate the conditions required to guarantee sta-
bility and to prevent any engine part from
being damaged.
– Before starting the installation, the install-
er has to implement a "safety plan" and to
follow the designer's indications. Do not
make changes to the engine components
for any reason.
– It is necessary to make sure that the in-
stallation area is fitted with all intake, fuel
supply and exhaust connections.
- 23 -
D700/750 E2-E3
Safety information
GB