Maintenance during running-in table (first 50 hours)
Important
For each maintenance operation, fill in
the "Periodic maintenance operation
record sheet" provided, so as to keep a
Frequency
(1)
Component
Engine oil
Every 10
Coolant
hours
(every day)
Air filter
Coolant fluid radia-
tor
Engine oil
After the first
Oil filter
50 hours (at
the end of
running-in)
Transmission belt
Routine maintenance table (after running-in)
Important
For each maintenance operation, fill in
the "Periodic maintenance operation
record sheet" provided, so as to keep a
Frequency
(1)
Component
Engine oil
Coolant
Every 10
hours
Air filter
Coolant fluid radia-
tor
English
Type of intervention
(2)
Level control
(4)
Level control
Check it is clean
Check it is clean
(2)
Replacement
(3)
Replacement
Checking the ten-
(5)
sion
Integrity control
Type of intervention
(2)
Level control
(4)
Level control
Check it is clean
Check it is clean
trace of the operations performed and
therefore establish the most suitable
methods for future operations.
Intervention procedures
Top up, if necessary
Top up, if necessary
Clean with low pres-
sure compressed air
Clean with a soft brush
Tension belts
Replace, if necessary
trace of the operations performed and
therefore establish the most suitable
methods for future operations.
Intervention procedures
Top up, if necessary
Top up, if necessary
Clean with low pressure
compressed air
Clean with a soft brush
- 37 -
D700/750 E2-E3
Reference
See "Engine oil level
control"
See "Engine coolant
level check"
See "Engine oil
change"
See "Oil filter cartridge
replacement"
See "How to adjust the
tension of the driving
belt"
See "Belt replacement"
Reference
See "Engine oil level
control"
See "Engine coolant
level check"
Maintenance information
GB