Care And Cleaning - Atag VA6311NF Notice D'utilisation

32
Consumption values
Programme
1) The display shows the programme time.
The water pressure and temperature,
the variations of the mains supply and

Care and cleaning

To remove and clean the filters
Dirty filters decrease the washing results.
Although the maintenance is very low with
these filters, make a check at intervals and
if necessary, clean them.
1. Turn the filter (A) counterclockwise and
remove it out from filter (B).
C
B
2. Filter (A) has two parts. To disassemble
the filter, pull them apart.
1)
1.4 - 1.6
1.4 - 1.6
0.9
1.0 - 1.1
0.1
C
A
Energy (kWh)
the quantity of dishes can change the
consumption values.
3. Fully clean the parts with water.
4. Put the two parts of the filter (A) togeth-
er and push. Make sure that they as-
semble correctly in each other.
5. Remove the filter (B).
6. Fully clean the filter (B) with water.
7. Put the filter (B) to its initial position.
Make sure that it assembles correctly in
the two guides (C).
Water (litre)
15 - 16
16 - 17
9
10 - 11
4