Care And Cleaning; Cleaning The Filters; Cleaning The Spray Arms - Atag VA61111KT Notice D'utilisation

• The position of the items in the baskets is
correct.
• The programme is applicable for the type
of load and for the degree of soil.

CARE AND CLEANING

Warning! Before maintenance,
deactivate the appliance and
disconnect the mains plug from the
mains socket.

Cleaning the filters

B A
A1
A2

Cleaning the spray arms

Do not remove the spray arms.
• The correct quantity of detergent is used.
• There is dishwasher salt and rinse aid
(unless you use combi detergent tablets).
• The cap of the salt container is tight.
1. Turn the filter (A) counterclockwise and
C
remove it.
2. To disassemble the filter (A), pull apart
(A1) and (A2).
3. Remove the filter (B).
4. Wash the filters with water.
5. Before you put the filter (B) back, make
sure that there are no residues of food
or soil in or around the edge of the
sump.
6. Make sure that the filter (B) is correctly
positioned under the 2 guides (C).
7. Assemble the filter (A) and put it back
in filter (B). Turn it clockwise until it
locks.
An incorrect position of the filters can
cause bad washing results and dam-
age to the appliance.
If the holes in the spray arms are clogged,
remove remaining parts of soil with a thin
pointed object.
Dirty filters and clogged spray arms de-
crease the washing results.
Make a check regularly and, if neces-
sary, clean them.
21