Washing Programmes - Atag VA6311NF Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

The countdown is operating
1. Press the delay start button again and
again until the display shows the time of
the washing programme.
• The programme time flashes in the
display. After some seconds, the time
stops to flash and the washing pro-
gramme starts automatically.
Interruption of a washing programme
• Open the appliance door.
– The washing programme stops.
• Close the appliance door.
– The washing programme continues
from the point of interruption.
Cancelling the washing programme
If the washing programme has not started,
you can change the selection.
To change the selection while the washing
programme operates, it is necessary to
cancel the programme.
• Press and hold function button (B) and
function button (C) at the same time until
all the programme indicators come on.

Washing programmes

Programme
1)
2)
1) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.
2) This is the standard programme for test institutes. With this programme you have the most efficient use of water
and energy consumption for crockery and cutlery with normal soil. Refer to the supplied leaflet for test information.
Type of soil
Heavy soil
Crockery, cutlery,
pots and pans
Normal soil
Crockery and cutlery
Fresh soil
Crockery and cutlery
Normal soil
Crockery and cutlery
Use this programme to quickly rinse the
dishes. This prevents the remaining food
to bond on the dishes and bad odours to
come out from the appliance.
Do not use detergent with this pro-
gramme.
Make sure that there is detergent in the
detergent dispenser before you start a
new washing programme.
End of the washing programme
When the washing programme is comple-
ted, the display shows a zero and the end
indicator is on.
1. Deactivate the appliance.
2. Open the appliance door.
For better drying results, keep the ap-
pliance door ajar for some minutes.
Remove the items from the baskets
• Let the dishes become cold before you
remove them from the appliance. Hot
dishes can be easily damaged.
• First remove the items from the lower
basket, then from the upper basket.
• There can be water on the sides and on
the door of the appliance. Stainless steel
becomes cool more quickly than the
dishes.
Type of load
Prewash
Wash 70 °C
Rinses
Dry
Prewash
Wash 65°C
Rinses
Dry
Wash 60 °C
Rinse
Prewash
Wash 50 °C
Rinses
Dry
Rinse
Programme description
31

Publicité

Table des Matières
loading

Table des Matières