Care And Cleaning; Cleaning The Filters; Cleaning The Spray Arms; Internal Cleaning - Atag VA63111ST Notice D'utilisation

26

CARE AND CLEANING

Warning! Before maintenance,
deactivate the appliance and
disconnect the mains plug from the
mains socket.

Cleaning the filters

C
B

Cleaning the spray arms

Do not remove the spray arms.
If the holes in the spray arms are clogged,
remove remaining parts of soil with a thin
pointed object.

External cleaning

Clean the appliance with a moist soft cloth.
Only use neutral detergents. Do not use
abrasive products, abrasive cleaning pads
or solvents.
1. Turn the filter (A) counterclockwise and
C
A
2. To disassemble the filter (A), pull apart
3. Remove the filter (B).
A1
4. Wash the filters with water.
5. Before you put the filter (B) back, make
A2
6. Make sure that the filter (B) is correctly
7. Assemble the filter (A) and put it back

Internal cleaning

If you regularly use short duration pro-
grammes, these can leave deposits of
grease and limescale inside the appliance.
To prevent this, we recommend to run long
duration programmes at least 2 times per
month.
Dirty filters and clogged spray arms de-
crease the washing results.
Make a check regularly and, if neces-
sary, clean them.
remove it.
(A1) and (A2).
sure that there are no residues of food
or soil in or around the edge of the
sump.
positioned under the 2 guides (C).
in filter (B). Turn it clockwise until it
locks.
An incorrect position of the filters can
cause bad washing results and dam-
age to the appliance.