Technical Data; Environment Concerns - Atag VA6311NF Notice D'utilisation

Problem
Activating the rinse aid dispenser
1. Activate the appliance. Make sure that
the appliance is in setting mode.
2. Press and hold function button (B) and
function button (C) at the same time un-
til the programme indicators above
function buttons (A), (B), and (C) start to
flash.
3. Release function button (B) and function
button (C).
4. Press function button (B).
• The programme indicators above
function button (A) and function but-
ton (C) go off.

Technical data

Dimensions
Water supply pressure
1)
Water supply
Capacity
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
The rating plate on the inner edge of
the appliance door shows the electrical
connection data.
If the hot water comes from alternative
sources of energy, (e.g. solar panels,

Environment concerns

The symbol on the product or on its
packaging indicates that this product may
not be treated as household waste. Instead
it should be taken to the appropriate
collection point for the recycling of electrical
and electronic equipment. By ensuring this
product is disposed of correctly, you will
help prevent potential negative
consequences for the environment and
human health, which could otherwise be
Possible cause
The multitab function is on (this
function automatically deacti-
vates the rinse aid dispenser).
5. Press function button (B) to change the
6. Deactivate the appliance to confirm.
Width
Height
Depth
Minimum
Maximum
Cold water or hot water
Place settings
caused by inappropriate waste handling of
this product. For more detailed information
about recycling of this product, please
contact your local council, your household
waste disposal service or the shop where
you purchased the product.
Recycle the materials with the symbol
Put the packaging in applicable containers
to recycle it.
Possible solution
Activate the rinse aid dispenser.
• The programme indicator above func-
tion button (B) continues to flash.
• The display shows the setting of the
rinse aid dispenser.
setting.
photovoltaic panels and aeolian), use a
hot water supply to decrease energy
consumption.
35
The rinse aid dis-
penser is deactiva-
ted.
The rinse aid dis-
penser is activated.
596 mm
818 - 898 mm
575 mm
0.5 bar (0.05 MPa)
8 bar (0.8 MPa)
maximum 60 °C
12
.