Progress PAS8060E Notice D'utilisation page 18

18 progress
To switch off
The keep warm setting
and . It is used to keep food warm.
Switching the outside ring on and off
By switching the outside rings on or off, the
effective heating surface can be matched to
the size of the cookware.
Double ring cooking zone
To switch on outside ring
To switch off outside ring
Roasting zone
To switch on outside ring
To switch off outside ring
Locking/unlocking the control panel
The control panel, with the exception of the
"On/Off" sensor field, can be locked at any
Switch on
Switch off
When you switch the appliance off, the
locking function is automatically switch-
ed off.
Using the automatic warm-up function
All cooking zones are equipped with an au-
tomatic warm up function When setting a
heat setting using
Switch on (only when
starting at )
Switch off
Not used
If during the automatic warm up
higher heat setting is selected, e.g. from
to , the automatic warm up is ad-
justed.
If there is still residual heat on the cook-
ing zone (display
warm up is not performed.
Control panel
Touch and at the same time
lies between
Touch
Touch
Touch
Touch
Control panel
Touch
Touch
, when starting from
Control panel
Touch
Touch
Touch
), the automatic
Before an outside ring can be switched
on, the inside ring must be switched on.
Sensor field
for 1-2 seconds
for 1-2 seconds
Sensor panel
for 1-2 seconds
for 1-2 seconds
time in order to prevent the settings being
changed e.g. by wiping over the panel with a
cloth.
previously set heat setting
, the cooking zone switches to full power
for a certain amount of time and then auto-
matically switches back to the heat setting
set.
Possible heat settings
to
to /
to
The length of time that the automatic warm
a
up function operates depends on the heat
setting selected.
Indicator
Pilot light
is lit
goes out
Power indicator
is lit
goes out
Display
(for 5 seconds)
Display
(after 5 seconds)
to
to