3. A - Absorbed current
•
Current absorbed by the pump in
Ampere
•
Frequency graph indicator
4. HH:MM:SS - Time
•
Time set on the pump
•
Day of the week
5. Display position
•
"UP" or "DOWN" orientation of the
display
•
"ROTD" indicates the display position
menu
6. Complementary pump status unit only in group configuration
•
"STB" the complementary pump is on
standby
•
"ON " the complementary pump is on
and regulating
•
<Alarm or fault code> the
complementary pump is in alarm (for
adescription of alarm codes, please
see Chpt. 6,0)
•
Frequency graph indicator
Push the button in order to visualize the state of the complementary pumps.
The pressure parameter is displayed by default (BAR or PSI); after 10 minutes of displaying one of the other parameters the system
automatically returns to displaying pressure.
•
Measurement unit
•
Frequency graph indicator
•
Frequency graph indicator
•
"STOP" the complementary (slave)
pump has stopped
•
"PRG" the complementary (slave) pump
has stopped and is in programming
mode
•
"NSxx" slave number
•
"H000" pump working hours
EN
31