Jotul F 500 ECO Manuel D'installation Et D'utilisation page 14

ENGLISH
Fig. 18b Removing of baffle plates
2. The baffle plates are now loose and can be edged out of
the stove. NB: Right plate first, then left.
When refitting, follow the same procedure in reverse order
(first see fig. 18c).
Fig. 18c Replace gasket on baffle plate
3. When replacing the baffle plate, the gasket against the
exhaust deflector must also be replaced. This is done by
putting the included gaskets in grooves on the top of the
baffle plate.
7.2 Replacing the exhaust deflector
Fig. 19a Replacing the exhaust deflector
1. Loosen the 2 screws on each side of the stove.
14
Fig. 19b Replacing the exhaust deflector
2. Loosen the screw (A) that holds the top plate in place. This must
be done from the inside of the burnchamber.
Fig. 19c Replacing the exhaust deflector
3. Lift the top, turn it 180 degrees and place it on a flat underlay.
NB: It is important that the underlay is soft, so that the surface
is not damaged.
Fig. 19d Replacing the exhaust deflector
4. Loose the 4 screws that secures the exhaust deflector to the
top.
5. When refitting, follow the same procedure in reverse order.
A