Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Notes and Precautions
•
The [Lamp time] item in the Status display menu indicates the time of lamp use (as a
rough guide)
•
Please replace the lamp after 2000 hours of use with [Lamp power] in the Default
setting 1 menu set to [Standard], and 3000 hours of use with [Lamp power] in the
Default setting 1 menu set to [Low].
•
There are cases that the lamp can not work before the above mentioned period expires
or before the replacement message is displayed.
•
Attach the outer lamp cover correctly so that it is not loose. If it is not attached correctly,
the projector may fail to be powered on or the lamp may fail to come on.
•
Always replace the lamp with a new one.
•
The lamp is made out of glass. Do not touch the glass surface with your bare hands,
bang it, or scratch it. (Dirt, jolts, scratches and the like could break the lamp.)
About lamp replacement messages
•
The lamp replacement message of this projector displays an appropriate
period according to the use period for [Standard] / [Low] of the [Lamp power]
respectively.
When the replacement time approaches, the message of "The lamp life is ending.
•
Please change the lamp." is displayed every time the power is turned on. This
display disappears when you press the
Used Lamps
This projector's lamps contain trace amounts of environmentally harmful inorganic
mercury. Be careful not to break used lamps, and dispose of them in accordance with
local regulations or contact your sales representative.
button.
25
Publicité
Table des Matières
