Volume Control; Transmitting And Receiving - switel WTF 729 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Operating the Walkie−Talkies
5 Operating the Walkie−Talkies
Description of operating sequences in the manual
P
a P
b P
ON
ð
Switching the walkie−talkie on/off
a V
All the icons available appear briefly in the display. The
channel last set and the CTCSS code then appear.
a V
If you are not going to use the walkie−talkie for a longer
period, we recommend removing the battery pack.

Volume control

X/Y

Transmitting and receiving

34
Transmitting
The red LED lights up after pressing the P button.
An acoustic warning signal is issued if the P button is pressed
longer than 60 seconds. Transmission is interrupted.
a P, ð
Hold the walkie−talkie approx. 5−7 mm cm from your
mouth and speak at a normal volume. In order to talk to
other subscribers, the respective walkie−talkies must be
set to the same channel and CTCSS code.
35
Receiving
b P
Radio signals cannot be received when the P button
is being pressed.
Press the button depicted
Press and hold the button depicted
Release the button depicted
Text in the display
Speak into the microphone
33
Switch the walkie−talkie on
Switch the walkie−talkie off
Increase/decrease volume setting
Transmit
Receive
63

Publicité

Table des Matières
loading

Table des Matières