Required Assembly Material - FLORABEST FRG 45 A1 Mode D'emploi

Assembly

Required assembly material

WARNING
► To avoid possible injury, the screw heads should always face outwards.
First tighten all screw connections down when the assembly is complete,
this will help avoid undesirable material tensions.
Step 1
IMPORTANT
► The two long legs
holes in the fi rebowl
♦ Assemble the 4 legs (
and a leg cap
FRG 45 A1
Pliers
Philips head screwdriver
Open-jawed spanner 8 mm / 13 mm
5 must be assembled on the side where the double
11 are located.
5 + 9 ), each with 1 screw M6 x 30, a washer Ø 6
, onto the fi rebowl
10
11
.
11
5
10
9
GB
41