Assembly; Preparing For Assembly; Required Assembly Materials - FLORABEST FTKG 29 A1 Mode D'emploi

Assembly

Preparing for assembly

Allow yourself plenty of time to assemble the round barbecue. Find a level work
surface about one to two square metres in size. Remove all individual items from
the packaging and place them where they are conveniently handy.

Required assembly materials

WARNING
► To avoid possible injury, the screw heads should always face outwards.
Step 1
♦ Screw the handle
Ø6 x 16
♦ Secure the air vent
Ø6 x 12
FTKG 29 A1
Phillips head screwdriver
Open-ended spanners width across fl ats 5 mm,
width across fl ats 8 mm
to the hood
, spring ring Ø5
F H
to the hood
2
, spring washer Ø5
G
C
2
F
H
L
using bolt M5 x 10
3
and wing nut M5 .
L
using bolt M5 x 10
3
and nut M5 .
H I
, washers
C
, washer
C
3
G
H
I
53
GB