Spare Parts - WAGNER W 690 FLEXIO EXTRA KIT Mode D'emploi

GB
the air filter compartment (Fig. 26, A). Replace both air filters (Fig. 26, B). Close the cover
of the air filter compartment.
Ventilating hose / Valve (Wall Extra I-Spray spray attachment)
•
Pull the ventilating hose (Fig. 18, A) at the top from the gun body. Screw off the valve
cover (B). Remove the diaphragm (C). Carefully clean all parts or replace in the event
of damage.
•
Place the diaphragm (Fig. 18, C) with the pin facing upwards on the bottom section of
the valve. Also see the marking on the gun body.
•
Place on the valve cover (Fig. 18, B) and screw it closed.
•
Place the ventilating hose (Fig. 18, A) on the valve cover and on the nipple at the gun body.
Ventilating hose / Valve (Gravity spray attachment)
•
Remove the hose, dismantle it and remove the membrane (Fig. 18, D).
•
Carefully clean all parts or replace if required.
•
During assembly, insert the membrane (fig. 18, D) with the pin pointing downwards.

19. Spare Parts

Spare Parts List Gravity spray attachment (Fig. 27)
Pos. Designation
Gravity spray attachment complete with container (600ml and
150 ml)
1 Union nut
2 Air cap
3 Nozzle
4 Seal
5 O-ring of spray attachment
6 Ventilation hose with valve
7 Container with cover 600 ml
8 Container with cover 150 ml
Spare Parts List Wall Extra I-Spray spray attachment (Fig. 28)
Pos. Designation
Wall Extra I-Spray spray attachment complete with 1800 ml
container
1 Air cap
2 Union nut and nozzle
3 O-ring of spray attachment
4 Ventilating hose, valve cover, diaphragm
30
W 690 Flexio Extra Kit
Order No.
2412884
2410212
2362 877
2361238
0417 706
2362 875
2410217
2410208
2410210
Order No.
2361 749
2382 753
2382 751
2362 875
2382 754