Accessories And Spare Parts; Accessories For Super Finish 27 And 31 - WAGNER Super Finish 27 Mode D'emploi

12.

ACCESSORIES AND SPARE PARTS

12.1

ACCESSORIES FOR SUPER FINISH 27 AND 31

Item SuperFinish 27
Order no.
1 0341 705
2 0341 713
3 0341 910
4 0070 212
0070 317
0070 344
0070 326
5 0502 166
0296 388
6 0296 441
0296 443
0296 442
0296 444
7 0097 057
8 0345 010
9 9984 510
9984 507
9984 562
10 0034 030
11 0341 263
12 0097 531
13 0341 265
14
0097 258
0097 259
15 0341 266
16
0097 260
0097 261
17 0034 950
0034 952
0034 951
18
0037 607
0003 756
0097 521
0017 408
19 0034 660
20 0034 630
0340 720
Super Finish 27 • 31
SuperFinish 31 Description
Order no.
Accessories illustration, see page 44
--------------------- Inlet valve – trigger housing
--------------------- Tool box
0341 910 Hose drum (without high-pressure hose) for 30 m high-pressure hose DN 6 mm
0070 212 High-pressure filter 200 meshes, 0.085 mm mesh width
The high-pressure filter is suitable as a fine filter, each tuned to the tip used.
0070 317 Filter insert 200 meshes (tip size under 011/0.28 mm)
0070 344 Filter insert 100 meshes (tip size over 011/0.28 mm)
0070 326 Filter insert 70 meshes (tip size over 015/0.38 mm)
Spray gun accessories and tips, see page 48
Accessories illustration, see page 103
0502 166 Spray gun AG-14 (stainless steel model)
0296 388 Spray gun AG-08 (aluminium model)
0296 441 Length 120cm; G thread 7/8"
0296 443 Length 120cm; F thread 11/16"
0296 442 Length 200cm; G thread 7/8"
0296 444 Length 200cm; F thread 11/16
0097 057 Injection lance for regeneration of concrete
0345 010 Inline Roller IR-100
9984 510 High-pressure hose DN 4 mm, 7.5 m with stainless steel nipple
9984 507 High-pressure hose DN 6 mm, 15 m for dispersion
9984 562 High-pressure hose DN 6 mm, 30 m for dispersion
0034 030 Double socket for coupling high-pressure hoses
0341 263 Suction system QuickClean, filter mesh width 1 mm
0097 531 Filter bag, mesh width 0.3 mm
0341 265 Upper hopper fittings, 5 litres
Hopper filling sieve for upper hopper 5 litres. Prevents filling of rough particles
from the container. Through this suction problems are avoided.
0097 258 Sieve package (5 pcs) for paint
0097 259 Sieve package (5 pcs) for dispersion
0341 266 Upper hopper fittings, 20 litres
Hopper filling sieve for upper hopper 20 litres. Prevents filling of rough particles
from the container. Through this suction problems are avoided.
0097 260 Sieve package (5 pcs) for paint
0097 261 Sieve package (5 pcs) for dispersion
0034 950 Metex-Reuse
Reuse for pre-filtering of coating material in vessel. Place suction pipe in the
reuse.
0034 952 Sieve package (5 pcs) for paint
0034 951 Sieve package (5 pcs) for dispersion
Filter disks Upper hopper, 5 litres
0037 607 Filter disk, mesh width 0.8 mm
0003 756 Filter disk, mesh width 0.4 mm
Filter disks Upper hopper, 20 litres
0097 521 Filter disk, mesh width 0.8 mm
0017 408 Filter disk, mesh width 0.4 mm
0034 660 Suction system (flexible) for paint
0034 630 Suction system (flexible) for dispersion
0340 720 Concrete regeneration set (without diagram)
GB
Accessories and spare parts
43