Protection Fuses - GiBiDi SC24 Instructions Pour L'installation

SC24
6 - ELECTRICAL CONNECTIONS: FASTON
Faston Description
0 Vac Transformer 0 Vac connection (black cable).
18 Vac Transformer 18 Vac connection (orange cable).
24 Vac Transformer 24 Vac connection (red cable).

7 - PROTECTION FUSES

Position Value
F1 315 mA FAST-BLOW
F2 5 A FAST-BLOW
F3 500 mA FAST-BLOW
8 - DIP SWITCH SW1
The settings are stored during the rest phase (gate closed
The DEFAULT settings are coloured in grey .
DIP Function
STEP–BY-STEP
WITH STOP
STEP–BY-STEP
DIP1
DIP 2
CONDOMINIUM
DEAD MAN
Type Description
Protects the ACCESSORY and SAFETY DEVICE power supply.
Protects the control unit at the 24 VAC power supply input.
Protects the flashlight output.
Status Description
Operation in reply to a START command
• Gate closed
• During opening
OFF
OFF
• Gate open
• During closing
• After a STOP
Operation in reply to a START command
• Gate closed
ON
• During opening
OFF
• Gate open
• During closing
Operation in reply to a START command
• Gate closed
• During opening
OFF
ON
• Gate open
• During closing
• If START button is held down
• If PEDESTRIAN button is held down
ON
The SAFETY 8K2, PHOTO inputs and the decelerations will not be active.
ON
STOP 8K2 will be enabled.
Not manageable with radio control.
).
:
→ OPENS
STOPS
→
→ CLOSES
STOPS
→
→ inverts the motion
:
→ OPENS
→ CLOSES
→ CLOSES
OPENS
→
:
→ OPENS
→ IRRELEVANT
Recharges the automatic closing time if the automatic
→
reclosing is enabled, otherwise closes
→ OPENS
OPENS
→
CLOSES
→
13
UK
.