Warnings For The User; Protection Fuses - GiBiDi CL100 Instructions Pour L'installation

CL100

WARNINGS FOR THE USER

In the event of an operating fault or failure, cut the power upstream of the control unit and call Technical Service. Any repairs
must be carried out by specialised personnel using original and certified materials.
The appliance is not to be used by children or people with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or instruction.
Do not touch the card for adjustments and/or maintenance.
WARNING: IMPORTANT SAFETY INSTRUCTIONS.
For people's safety, it is important to follow these instructions.
Please keep this manual.
ELECTRICAL CONNECTIONS: FASTONS
Terminal Position
1
M1 2
3
4
5
M2 6
7
8
9
10
11
M3
12
13

PROTECTION FUSES

Position Value
RT1 250 mA
NOTE: The restorable fuse intervenes in case of anomalous operating conditions, breaking the circuit. It is automatically
restored with normal operating conditions so that the card goes back to its correct operation.
If the fuse is not restored automatically, carefully check the devices externally connected to the card.
SETTINGS - dip switch dip1
Dip Status
ON
DIP1
OFF
ON
DIP2
OFF
Signal Description
Common flashing light/electrical lock
L/S
S12/24
Flashing light or 12/24 electrical lock input
L12/24
230 V flashing light input
L230
12/24 V power supply card input
+ 12/24
12/24 V power supply card input
- 12/24
START input
START
LUX Photoresistance input
COM Common START and LUX
NO NO Contact
NC NC Contact
COM Common Contacts
230 V or 12/24 V input for courtesy light or electromagnet
V_AUX
power supply
230 V or 12/24 V input for courtesy light or electromagnet
V_AUX
power supply
Type Description
Card power supply input protection
RESTORABLE
Function Description
Power supply input preset for 12 V
12 Vac/dc
Power supply input preset for 24 V
24 Vac/dc
START Bistable START command
START Monostable START command
11
UK