Technical Specification - Agilent Technologies TwisTorr Medium-TMP Mode D'emploi

17 Technical Information

Technical Specification

Technical Specification

Table 1 Technical Specification
CHARACTERISTIC
Power supply:
Input voltage:
Input freq.:
Max input power:
Max operating power:
Protection fuse
Compliance with:
Serial communication (Navigator kit)
Installation category
Pollution degree
Storage temperature
Weight
Operating ambient temperature
When the TwisTorr Medium-TMP onboard Controller has been stored at a temperature
NOTE
less than 5°C, wait until the system has reached the above mentioned temperature.
WARNING! The pump must be installed in a way that allows an easy interruption of the
line voltage.
Power supply cord: the correct cable for electrical wiring is a three wires (Ph+N+Earth) cable.
The wire section has to be at least 1 mm
144/181
TwisTorr Medium-TMP onboard Controller User Manual / 87-901-050-01 (B)
100 to 240 Vac (+/- 10%)
50/60 Hz
600 VA
200 W (+/- 5%) with water cooling
200 W (+/- 5%) with air cooling
1 x 6.3 A
EN-61326-1 2013
EN 61010-1 2010
RS232 cable with a 9-pin D type male connector and a 9-
pin D type female connector, and communication software
(optional)
II
2
-20° C to +70° C
5.4 kg (12 lbs)
+5 °C to +40 °C
.
2