Maintenance - Agilent Technologies TwisTorr Medium-TMP Mode D'emploi

Maintenance

The TwisTorr Medium-TMP onboard Controller does not require any
maintenance. Any work performed on the system must be carried out
by authorized personnel. Before carrying out any operation on the
system, it must be disconnected from the power supply. If a fault
occurs, it is possible to use the Agilent repair service. Replacement
controllers are available on an advance exchange basis through
Agilent.
WARNING! Before carrying out any work on the controller, disconnect it from the power
supply.
Before returning the controller to the manufacturer for repairs, or replacement
NOTE
with a reconditioned unit, the "Request for return" sheet attached to this
instruction manual must be filled in and sent to the local sales office. A copy of
the sheet must be inserted in the system packaging before shipping.
If a controller is to be scrapped, it must be disposed of in accordance
with the specific national standards.
TwisTorr Medium-TMP onboard Controller User Manual / 87-901-050-01 (B)
Instructions for Use

Maintenance

139/181
16