Agilent Technologies TwisTorr Medium-TMP Mode D'emploi page 167

402
500
503
504
1. Automatic means that when the controller stops, the vent valve is opened
NOTE
with a delay defined by window n. 126; when the controller starts, the vent
valve is immediately closed.
2. On command means that the vent valve is opened or closed by means of
window n. 122.
TwisTorr Medium-TMP onboard Controller User Manual / 87-901-050-01 (B)
Procedure to Connect the Serial and I/O Ports to an External Cable
R A
Reserved to Agilent service
R/W N
R/W L
7
TOO HIGH LOAD
SHORT CIRCUIT
OVERVOLTAGE
AUX FAIL
CRC Param. (PA)
RS 485 address
Serial type select
6 5 4 3 2 1 0
NO CONNECTION
PUMP OVERTEMP.
CONTROLL. OVERTEMP.
POWER FAIL
Technical Information
PA8XXXX
(where "XXXX"
are variable)
0 to 31
(default = 0)
0 = RS 232
1 = RS 485
(default = 0)
167/181
17