Weighing; Before Weighing - Adam Equipment LBK-3/6a Mode D'emploi

5.0 WEIGHING

5.1 BEFORE WEIGHING

Check the setting of the auto shut off function, see section 6.2. If the auto
shut off function is on, the scale will shut off after a period of time if the scale
is not used and it has a stable reading.
5.2 WEIGHING
• Press [On/Off] to turn on the scale. The display will show "LBK-1.0 LBK"
and show the current voltage "X.X vol" .Then it will begin it's self
checking test from 0 to 9. When the reading is stable, the display will
show "0.00", stable symbol, zero symbol, and the weighing unit used
the last time the scale was used.
• Press [Unit] to select units, "g" / "Kg" / "lb" / "oz"/"Lb.z ".
• Check if the reading is "0.00", if not, press [Zero]. "0.00" and the zero
symbol will be displayed.
• Put the item to be weighed on the pan. When the reading is stable, the
net weight will be shown.
• If a container is used, put the container on the pan and press [Tare] key
when the reading is stable. The display will show "0.00" and the zero
symbol and net weight symbol.
© Adam Equipment Company 2014
8