V-Check Points - MSI MEG Z390 GODLIKE Présentation Rapide

8. Insert the M.2 SHIELD FROZR heatsink shaft into the groove.
9. Push the M.2 SHIELD FROZR heatsink down.
10. Secure the M.2 SHIELD FROZR heatsink onto the mounting pole.
10

V-Check Points

These voltage checkpoints are used to measure the current system voltages. A
multimeter (not included) will be required to check voltages. To measure voltage,
place test leads on the GND (screw mountin g hole) and a V-Check Point. Please refer
to the manual of your multimeter for more information.
8
9
GND
CPU
VCCIO
VSA
DRAM
PCH
Overview of Components
25