Bclk+1, Bclk-1: Base Clock Plus & Minus Button; V-Check Points - MSI MEG X570 GODLIKE Présentation Rapide

Important
You can also control the GAME BOOST function in BIOS Setup or with MSI DRAGON
y
CENTER software.
In order to optimize performance and improve system stability, when you activate the
y
GAME BOOST function, please leave the settings in the BIOS > OC menu unchanged.
The success of overclocking depends on the components of your computer.
y
We do not guarantee the GAME BOOST overclocking range or the damages/ risks
y
caused by overclocking behavior.
MSI components are recommended for better compatibility when using GAME
y
BOOST function.
BCLK+1, BCLK-1: Base Clock Plus & Minus Button
Press these button to increase or decrease the CPU base clock.
Setting CPU BCLK
1. Go to BIOS > OC.
2. Set OC Explore Mode to Expert.
3. Adjust the relevant settings in the CPU BCLK Settings submenu.
4. Press F10 to save and exit and then press the Enter key to select Yes.

V-Check Points

These voltage checkpoints are used to measure the current system voltages. A
multimeter (not included) will be required to check voltages. To measure voltage,
place test leads on the GND (screw mounting hole) and a V-Check Point. Please refer
to the manual of your multimeter for more information.
30
Overview of Components
GND
SOC CORE
DDR
CHIP
1P8
BCLK-1
BCLK+1