V-Check Points; Onboard Leds; Ez Debug Leds; Dimm Leds - MSI X299 GAMING M7 ACK Présentation Rapide

V-Check Points

These voltage checkpoints are used to measure the current system voltages. A
multimeter (not included) will be required to check voltages. To measure voltage,
place test leads on the GND (screw mounting hole) and a V-Check Point. Please refer
to the manual of your multimeter for more information.

Onboard LEDs

EZ Debug LEDs

These LEDs indicate the status of key components during booting process. When an
error is occurred, the corresponding LED stays lit until the problem is solved.

DIMM LEDs

These LED indicate the memory modules are installed.
36
Onboard LEDs
GND (Screw mounting hole)
6 RING
CPU
DDR
SA
IO
1
CORE
CPU - indicates CPU is not detected or fail.
DRAM - indicates DRAM is not detected or fail.
VGA - indicates GPU is not detected or fail.
BOOT - indicates the booting device is not detected
or fail.
DIMM LEDs