Editing A Pattern; Muting A Part; Erasing A Part; Copying A Part - Korg electribe Manuel D'utilisation

2. Change the name of the pattern you want to save.
You can move the cursor on the display left and right using the
< button or the > button and determine the character you want
to change. Turn the Value knob to change the selected charac-
ter and confirm it with Menu/Enter button.
3. Select a pattern number to save your data by using the Value
knob.
4. Press the Write button after you complete the process of
changing the pattern name.
Pressing the Write button starts the save process. The Write
button is illuminated while the save process is taking place
and the button becomes dark when upon completion.
TIP Press the Exit button to cancel the save process.
TIP The Pattern number where the edited pattern will be saved
is selected after you complete the save process.

Editing a pattern

1. Muting a part

1. Press the Part Mute button to illuminate the button.
2. Press the part of the trigger pad that you want to mute to turn
it off.
3. Press the trigger pad that is dark to illuminate it when you
release the mute.

2. Erasing a part

1. Press the Part Erase button to illuminate the button.
2. During playback, press the trigger pad of the part which you
want to erase.
While holding the trigger pad, note information of the selected
part will be erased.
TIP To erase all sequence information of the currently selected
part, select CLEAR SEQUENCE from PART UTILITY in
the edit menu and execute it.
TIP Execute the CLEAR MOTION command in the edit menu
to erase the motion sequence.

3. Copying a part

1. Use the <Part, Part> buttons to select a part to copy.
2. Select PART COPY from PART UTILITY in the edit menu.
3. Press the Menu/Enter button and then press the part of the
trigger pad where you want to copy the data.
All contents of the original part will be copied to the part that
you selected.

4. Changing pattern setting

The following list introduces main setting related to patterns in the
edit menu.
Refer to the "Parameter Guide" for each setting.
SWING: Adds shuffling or hopping feelings by shifting sound
timing.
BEAT: Sets beat (rhythm) of a pattern.
LENGTH: Changes length of a pattern. You can set it to length
from 1 to 4.
PATTERN LEVEL: Adjusts sound volume of the entire pattern.
KEY: Sets pitch for scale reference.
SCALE: Sets scale for playing with the trigger pad or the touch
pad by turning the Keyboard button ON.
GROOVE TYPE and GROOVE DEPTH: Adds playing methods
of typical musical instruments and / or a groove which could
reproduce a feeling of the song to metronomic part sequence data.
13