Güde GWS 400 ECO Traduction Du Mode D'emploi D'origine page 12

Introduction
Please read thoroughly this operation manual and
attached safety instructions to enjoy your new appliance.
We further recommend keeping this manual for future
reference of the machine features and functions. For the
purpose of continuous development of our machines we
reserve right to technical changes.
This document is the original operation manual.
Components of the cradle saw (Fig. A)
1. Frame
2. Cross arm
3. Cradle extension
4. Feeding cradle
5. Moving cover of rotary saw
6. Cover o rotary saw
7. Motor
8. Switch - plug combination
9. Handles
10. Rotary saw
11. Linear endstop
12. Counter tips
13. Chopping pad
14. Switch off (red)
15. Switch on (green)
16. Ring nut key with front jaw span
17. Key
18. Nut
19. Outer flange
20. Inner flange
21. Motor shaft
Technical data
Connection:
Motor power:
Revs:
Rotary saw:
Cutting output:
Cradle width:
Extension of cradle:
Mounting dimensions:
Weight:
*Noise:
Measurement tolerance:
*The given values are emission values and therefore do
not have to represent safe values in the place of work.
Although there is correlation between emission and
pollutant levels, this is not a reliable basis for determining
whether or not additional safety measures are necessary.
Factors able to influence the current level of pollutants in
the place of work include the type of place of work, other
noise sources, etc. e.g. number of machines and other
related processes. Allowed values in the place of work
may also differ in each country. However, this information
should enable the user to evaluate better the threat and
risk.
General safety instructions
Observe elementary rules for accident preventions
when using the electric tools to avoid risks of fire,
electric shock hazard and personal injury. These rules
include the following:
Read and observe all instructions contained herein before
commissioning and operation of the machine.
Keep the safety instructions for future reference!
GB
230 V~50 Hz
2200 W, S6 40%
-1
2860 min
400x30x3.0 mm
max. 125 mm
min. 30 mm
840 mm
600 mm
920x820x1040 mm
37 kg
L 97,5 dB (A)
W
L 86,5 dB (A)
P
K=4 dB (A)
Safe work
Keep your workplace tidy!
Disorder on workplace may result in injuries.
Consider surrounding conditions!
Do not expose to rain.
Do not use in moist or wet environment.
Provide good lighting.
Do not use close to flammable liquids or gases
Protect against electric shock hazard!
Avoid contact of your body with earthed components.
Keep other persons in a safe distance!
Do not allow other persons, particularly children, to touch
the machine or the power cable. Keep them in a safe
distance from your workplace.
Store your tools!
The device, if not used, should be stored in a dry and
closed space, out of reach of children.
Do not overload your device!
You will work within the defined range of performance
better and safely.
Use correct tools!
Do not use poor machines for heavy works. Do not use the
machines for purposes other than specified.
Wear suitable work clothes!
Do not wear loose clothes and jewels as they could be
caught by moving parts of the machine.
We recommend using of anti-skid shoes when working
outside.
Wear a hairnet if you have long hairs.
Use personal protective equipment!
Always wear goggles.
Wear respirator for dusty works.
Do not use the cable for purposes other than
specified!
Do not use the cable to unplug the plug from the socket,
protect against high temperatures and sharp edges.
Avoid abnormal body posture!
Make sure you are stable and keep your balance.
Take good care of your tools!
Keep your tools sharp and clean to make your work
cleaner and safer.
Obey the maintenance instructions and tools replacement
instructions.
Check the machine cable regularly and ask a specialist to
replace the same if damaged.
Check extension cable regularly and replace, if damaged.
Keep handles dry, without traces of oils and greases.
Unplug the plug from the socket!
Unplug the plug from the socket if you do not use the
machine or when e.g. replace the rotary saw.
Do not leave any hand tools in the machine!
Before turning the machine on always check whether all
keys and adjustment tools are removed from the machine.
Avoid unintentional turning the machine on!
Make sure the switch is off when plugging the machine in
the socket.
Extension cables outdoors:
Use approved outdoor extension cables with
corresponding identification only.
Be careful!
12