Layout - Storage - Eurocave Professional 6000 Série Mode D'emploi

Masquer les pouces Voir aussi pour Professional 6000 Série:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
Your EuroCave Professional cabinet was designed to be adaptable. Its storage equipment adapts to your requirements and can be added to over
time.
Different types of storage
Standard storage equipment
Universal storage shelf
Capacity: 77 bottles
Max weight: 100 kg
Champagne sliding
Capacity: 10 bottles
Display shelf
Capacity: 22 bottles
Storage equipment available as an optional extra (equipment "PLUS")
Universal storage shelf
Ref.: AXUH2B
Ref.: AXUH2W
Capacity: 77 bottles
Max weight: 100 kg
The layout of your cabinet can be modified according to your requirements. Refer to pages 111-115 to see storage simulations.
1- A white marker pen is supplied in the accessories bag. It allows you to write on the shelf labels ("PLUS" equipment) in order to identify your bottles. 2- glossy black front 3- light wood front
Layout advice
Your EuroCave Professional wine cabinet has been designed to safely hold
a maximum number of bottles. We recommend that you observe the
following advice to optimize loading.
Distribute your bottles as uniformly as possible over the
various cabinet shelves, in order to spread the weight. Also
ensure that none of the bottles is touching the rear wall of the
cabinet.
Spread the load over the entire cabinet rather than placing
bottles all at the top or all at the bottom.
Observe the loading instructions for the specific storage layout
of your cabinet and never stack bottles on a sliding shelf.
If you have sliding shelves, it is preferable to position them in
the upper section of your cabinet to facilitate daily access.
Note: adjusting an ACMS/ACHH/ACGMS sliding
shelf
When you purchase your cabinet, the sliding shelves are already adjusted
to ideally suit the internal dimensions of your appliance. If you purchase
a new sliding shelf, you may have to carry out this adjustment. To do so,
unscrew the screws 1 of the first right or left runner 2 (2 screws) then
position the runner at the desired width and tighten the screws. Repeat
this process for the second runner (if necessary).
N6000-0815-7L-V9.indd 11
Ref.: AXUH
shelf
Ref. : ACHH
Ref.: ACPH
1
2
3
5 - L
– S
AYOUT
Bordeaux
storage shelf
Ref.: AXBH
Capacity: 78 bottles
Max weight: 100 kg
Magnum sliding shelf
fitted with
"Main du sommelier"
supports
Ref.: ACGMS
Capacity: 7 bottles
Articulated
presentation kit for
ACMS shelves
Ref.: AOPRESAR
Capacity: 32 bottles
Universal sliding
shelf fitted with "new
generation Main du
sommelier"supports
1
Ref.: ACMS2B
2
Ref.: ACMS2W
3
Capacity: 22 bottles
In the same way, place one or two bottles of each of your
different wines on the sliding shelves and keep spare bottles on
the storage shelves. You then simply replace bottles when they
are consumed.
When using your wine cabinet, never pull out more than one
sliding shelf at a time.
NB: Never modify the position of the stiffener in your cabinet
(see description page 6) without first consulting your retailer
and never handle this part when the cabinet is loaded.
2
1
TORAGE
Universal sliding shelf
fitted with
"Main du sommelier"
supports
Ref.: ACMS
Capacity: 12 bottles
Serving sliding shelf
Ref.: ACVH
Capacity: 20 bottles
Articulated
presentation kit for
ACMS2 shelves
Ref.: AOPRESAR2
Capacity: 32 bottles
2
18/09/15 11:48
11
GB

Publicité

Table des Matières
loading

Table des Matières