I- Adding Or Changing The Position Of A Sliding Shelf - Eurocave Professional 6000 Série Mode D'emploi

5 - L
I. Adding or changing the position of a sliding shelf
If the sliding shelf is already in place in your cabinet:
•
Completely unload the sliding shelf.
•
Then remove the sliding shelf by sliding it towards you whilst lifting the front section.
•
Remove the slide guides from the walls, marking off the right guide and the left guide.
•
Refit the slide guides (see diagram below).
A. Putting in place the back section of the guide
Wall
Wall
C. Then place the sliding shelf
ACMS
ACMS 2
The latch of the soft-close device may not be locked (left runner).
It is essential to lock it before positioning the sliding shelf on the runners.
Ensure that the latch is correctly positioned at the front.
If it is not, pull it towards the front to lock it.
a.
12
GB
N6000-0815-7L-V9.indd 12
– S
AYOUT TORAGE
Guide
Guide
Sliding shelf
Guide
B. Putting in place the front section of the guide
Guide
b.
Guide
Wall
Wall
18/09/15 11:48