Hob-Based Hood Control; Home Connect - Gaggenau AC250121 Notice D'utilisation Et De Montage

en Hob-based hood control
Switching on the button tone
The button tones can be switched on.
Requirement: The appliance is switched off.
Press and hold ⁠ and ⁠ for approx. three seconds.
1.
In the LED display, the LED for the setting that is
a
currently selected lights up.
Press ⁠ or ⁠ until LED 1 lights up in the LED dis-
2.
play.
To cancel the setting, press ⁠ .
To save the setting, press and hold ⁠ and ⁠
3.
prox. three seconds.
Or wait approx. 10 seconds until the setting is
saved automatically.
A signal tone sounds as soon as the selected set-
a
ting is saved.
Switching the button tone off
The button tones can be switched off.
Note: Signal tones for the appliance are always
switched on and cannot be switched off.
Requirement: The appliance is switched off.
Press and hold ⁠ and ⁠ for approx. three seconds.
1.
In the LED display, the LED for the setting that is
a
currently selected lights up.
Press ⁠ or ⁠ until LED 2 lights up in the LED dis-
2.
play.
To cancel the setting, press ⁠ .
To save the setting, press and hold ⁠ and ⁠
3.
prox. three seconds.
Or wait approx. 10 seconds until the setting is
saved automatically.
A signal tone sounds as soon as the selected set-
a
ting is saved.

Hob-based hood control

You can connect your appliance to a suitable hob and,
in this way, control the functions of your appliance via
the hob.
You have the following options for connecting the
appliances with each other:
Connecting the appliance via the Home Connect
¡
app. If both appliances are Home Connect-compat-
ible, they can be connected using the Home Con-
nect app. Follow the instructions in the app.
Connecting appliances directly with each other.
¡
Connecting appliances via the Wi-Fi home network.
¡
Note: Please note the safety precautions in the instruc-
tion manual for your appliance and ensure that they are
also observed when operating the appliance via the
hob-based hood control.
Tip: Operating your appliance always takes priority. It is
not possible to use the hood controls on the hob dur-
ing this time.
1
Wi-Fi is a registered trademark of the Wi-Fi Alliance.
28
Connecting directly
Requirements
Your appliance is now switched off.
¡
Before connecting the appliances, reset all connec-
¡
tions to your home network or other appliances. If
your appliance is connected directly to the hob, it
cannot be connected to your home network as well
and you will not be able to use Home Connect.
Note: Refer to the section entitled "Hob-based hood
1.
control" in the instruction manual for your hob.
for ap-
Switch on the hob and select the search mode.
Press and hold the ⁠ button until the LED for
2.
Home Connect flashes in the LED display.
The appliance is connected to the hob if the LED for
a
Home Connect no longer flashes and lights up per-
manently.
Connecting via your home network
Follow the instructions in
1.
→ "Automatically connecting the appliance to the
WLAN home network (Wi-Fi)", Page 29 or
→ "Manually connecting the appliance to the WLAN
home network (Wi-Fi)", Page 29.
As soon as the appliance is connected to the home
2.
network, establish the connection to the hob via the
Home Connect app.
Follow the instructions on your mobile device.
3.
for ap-
Home Connect
This appliance is network-capable. Connecting your ap-
pliance to a mobile device lets you control its functions
via the Home Connect app, adjust its basic settings
and monitor its operating status.
The Home Connect services are not available in every
country. The availability of the Home Connect function
depends on the availability of Home Connect services
in your country. You can find information about this at:
www.home-connect.com.
To be able to use Home Connect, you must first set up
the connection to the WLAN home network (Wi-Fi
to the Home Connect app.
¡ Automatically connecting appliance to WLAN home
network (Wi-Fi) → Page 29
¡ Connecting appliance to WLAN home network (Wi-
Fi) manually → Page 29
The Home Connect app guides you through the entire
login process. Follow the instructions in the Home Con-
nect app to configure the settings.
If the appliance is not connected to your home net-
work, it functions as an appliance with no network con-
nection and can still be operated via the display.
Tips
Please consult the documents supplied by
¡
Home Connect.
Please also follow the instructions in the Home Con-
¡
nect app.
1
) and