Mounting; Notes - Assa Abloy N1940 Notice De Montage

Mounting

Notes

!
Caution!
Functional limitation due to faulty recess of the lock pocket: The lock pocket
must be created corresponding to the lock pocket dimensions. You must insert
the lock without using any force and screw it into place, so that it is not subject to
mechanical stress (Fig. 5, page 82).
Property damage after drilling through the lock:You may only use existing holes
drilled at the factory to attach fittings. The lock must be removed for any work on
the door leaf, such as drilling or cutting.
Damage from dirt: The lock can be damaged by dirt. The lock pocket and all
holes must be cleaned (by blowing out or vacuuming) prior to installation.
Functional limitation due to distorted installation:The lock must be installed
free of torsion.
Restricted function due to mounting of a handle fitting on the inactive leaf: If a
handle fitting is mounted on the inactive leaf, the locking rod must be connected
on the alternative bar connection.
EN
28 Mounting